Phoebus: framing carbon-fibre fuel tanks for maximum thrust

-

Phoebus is a European Space Agency (ESA) project together with #ArianeGroup and #MTAerospace. It aims to assess the feasibility and benefits of replacing the metallic tanks on ESA’s Ariane 6 upper stage with #carbonfibre reinforced-plastic tanks. While this lightweight material offers the possibility of saving several tonnes of mass, such an approach has never been implemented before and presents significant technical challenges.



The #Phoebusteam has already proven it is possible, overcoming extremes in material science to contain #liquidoxygen and #liquidhydrogen with carbon fibre. Previous articles have highlighted progress on the #tanks, this article focuses on the surrounding structures, exploring both the challenges and advantages of carbon-fibre reinforced plastic.


A propellant tank is more than a container. The liquids inside must be pumped in and sent to the rocket engines for liftoff, while sensors monitor fuel levels and other parameters. These “feed-through” elements pass through the top and bottom of the tank. These openings also make it possible to clean the tanks and install equipment.


Bolts secure the end covers, but the tanks are made to hold liquid oxygen and hydrogen at temperatures far below –100°C. At these extremely cold levels, metal bolts behave very differently from the carbon material. Because metal and carbon react differently to the cold, they push and pull against each other, which can quickly create a path for leaks even at the tiniest imperfection.


 “The Phoebus team has worked wonders from an initial sketch of a concept to produce a manufactured full-scale part that works,” says #ESA propulsion engineer Kate Underhill, “performing some really cool (pun intended) and complicated cryogenic tests on the way.

MT Aerospace in Augsburg, Germany, started the manufacture in July 2025 of the two covers that will be installed on a full-scale oxygen tank later this year.


With the tanks and the covers sorted, project Phoebus is making significant progress in demonstrating that carbon fibre reinforced plastic is suitable for rocket tanks. These tanks are integral to the rocket stage, connecting to the engine and adding structural stability to endure powerful launch forces.

The Ariane 6 rocket upper stage’s engine is attached to the oxygen tank via a “thrust frame” with pipes running down it from the tanks to the engine. ArianeGroup has come up with an innovation that allows the fuel pipes to be a part of the thrust frame structure – two functions in one part equals a lighter launcher.


This innovative thrust frame started production in December 2024, at various suppliers in Germany, with the assembly to be performed at ArianeGroup in Bremen, Germany in 2026. This innovative #thrustframe is now in production, using the best techniques available worldwide such as including additive manufacturing for the central hub.


source : European Space Agency



Comments

Post a Comment

Popular posts from this blog

ENVALIOR ANNOUNCES NEW PPS COMPOUNDING FACILITY IN EUROPE

-
Image
Envalior launches new PPS compounding facility in Uerdingen, Germany. New facility supports growing demand for Xytron™ in Europe and the Americas. To better serve growing customer demand in Europe and the Americas, Envalior – a global leader in sustainable and high-performance engineering materials – announces that it will invest in a PPS (Polyphenylene Sulfide) compounding facility in Europe. Envalior’s PPS material Xytron™ combines a strong set of properties, including excellent chemical and hydrolysis resistance at elevated temperatures, extremely stable heat aging performance up to 240°C, very good and stable electrical properties at elevated temperatures, low moisture absorption with high dimensional stability, and inherent flame retardance that meets UL94 V0.  Since 2016, when Xytron™ entered the market, the PPS material has built a strong track record across OEMs and tier customers. The new facility will provide local supply and additional services to customers in Europe whi...
Read more

Today's KNOWLEDGE Share : What Is Going Wrong in UK Plastics Recycling?

-
Image
Today's KNOWLEDGE Share What Is Going Wrong in UK Plastics Recycling? Biffa shut its Sunderland plant. Viridor walked away from Avonmouth and Rochester. Yes Recycling Fife collapsed within a year. All three were backed by major investments All three had buyers lined up for recyclate All three are now offline This is not bad luck It is bad structure Over the next four posts I will break down: 1. Why cheap virgin imports are undercutting UK recyclers 2. How weak policy enforcement is fuelling market failure 3. What volatile PRNs and cheap exports are doing to infrastructure 4. Why demand from brands is softer than their promises Let’s start with the first: **Cheap Virgin Resin = Broken Economics** Virgin PE, PP, and PET have been flooding the global market. New capacity in Asia and the US has driven prices down 30 to 40 percent. Meanwhile, recycled plastic costs more to produce in the UK than it can sell for. We are asking UK recyclers to compete with materials made in places with – ...
Read more

Today's KNOWLEDGE Share : Robotic 3D printing can compete with traditional boatbuilding

-
Image
Today's KNOWLEDGE Share “Robotic 3D printing can compete with traditional boatbuilding”, Simone Barbera and Mattia De Santis, Caracol V2 catamaran was printed in Italy at Caracol’s production center and headquarter in Barlassina, near Milan, with a Heron AM 400, Caracol’s robotic Large Format Additive Manufacturing (LFAM) platform. The lattest was specifically configured with a 7-axis robotic arm mounted on a rail, enabling the printing of parts up to 10 meters in length. How did the collaboration between V2 Group and Caracol come about? Simone Barbera : The collaboration between V2 Group and Caracol originated from a shared vision to revolutionize boat manufacturing through sustainable innovation. V2 Group, a Spanish-company specialized in nautical design and engineering, is seeking to develop electric vessels manufactured sustainably. On the other hand, Caracol, leader in robotic advanced manufacturing technology, had had years of experience working with Large Format Additive Ma...
Read more