Today's KNOWLEDGE Share:𝐁𝐨𝐥𝐭 𝐆𝐫𝐚𝐝𝐞𝐬 (8.8) 𝐯𝐬. (10.9)

-

Today's KNOWLEDGE Share

𝐁𝐨𝐥𝐭 𝐆𝐫𝐚𝐝𝐞𝐬 (8.8) 𝐯𝐬. (10.9)

𝗕𝗼𝗹𝘁 𝗚𝗿𝗮𝗱𝗲 (8.8)

Grade 8.8 bolts are made of medium carbon alloy steel.

They have a minimum tensile strength of 800 MPa and a minimum yield strength of 640 MPa.

These bolts are known for their moderate strength and durability.

They are commonly used in machinery, automotive parts, and general engineering applications.



𝗕𝗼𝗹𝘁 𝗚𝗿𝗮𝗱𝗲 (10.9)

Grade 10.9 bolts are made of alloy steel and have a higher strength than Grade 8.8 bolts.

They have a minimum tensile strength of 1000 MPa and a minimum yield strength of 900 MPa.

These bolts are specifically designed for applications that require high strength and reliability.They are commonly used in structural steel connections, heavy machinery, and automotive engine components.


𝗦𝗼, 𝘄𝗵𝗮𝘁 𝘀𝗲𝘁𝘀 𝗚𝗿𝗮𝗱𝗲 (10.9) 𝗯𝗼𝗹𝘁𝘀 𝗮𝗽𝗮𝗿𝘁 𝗳𝗿𝗼𝗺 𝗚𝗿𝗮𝗱𝗲 (8.8) 𝗯𝗼𝗹𝘁𝘀?

Grade 10.9 bolts have higher tensile and yield strength, allowing them to withstand greater loads and stresses.

They are ideal for heavy-duty applications.

Grade 10.9 bolts are more durable and resistant to fatigue.

They can withstand challenging conditions and provide long-lasting performance.


Due to their higher tensile strength, Grade 10.9 bolts can achieve a higher preload.This provides better clamping force and improves joint integrity.

Grade 10.9 bolts are often used in critical or safety-sensitive applications where strength and reliability are vital.

Grade 8.8 bolts are suitable for general-purpose applications.


Source:Karim Nabil

Follow: http://polymerguru.blogspot.com


#metal #metalindustry #bolts #fasteners #mechanicalengineering

 #steelstructures #EN1090 #asme #welding #weldinginspection #construction #fabrication #piping #steel #quality #qualitycontrol #qualityassurance #pressurevessels #tanks #oilandgas #powerindustry

Comments

Post a Comment

Popular posts from this blog

Today's KNOWLEDGE Share:PLA BOTTLE

-
Image
Today's KNOWLEDGE Share Ever wondered how we can reduce plastic pollution in India? The Mysuru-based Defence Food Research Laboratory (DFRL), affiliated with the DRDO, has launched an eco-friendly remedy with the introduction of biodegradable water bottles. Crafted from sustainable Polylactic acid (PLA) material, these bottles not only combat plastic waste but also contribute to reducing the overall carbon footprint. The best thing about this bottle is its all-encompassing sustainability approach – the bottle, cap, and label are all compostable. This innovation, derived from 100% bio-based and renewable sources, sets us on a path towards environmental conservation and fosters a greener and more sustainable future. Source:The Better India #polymers #bioplastics #pla   #compostable   #ecofriendly   #sustainability
Read more

Opportunities in United States

-
Dear Members,  If you are looking for a new position in the United States,here are my personal recommendations to those who reside in the USA.  This portal is offering many roles from Junior to senior levels.You can stumble upon it to find a relevant position that suits your profile.  Pls visit the link:https://urbanlocalcmp.page.link/kEnz1gQdAmyySqrY8
Read more

Today's KNOWLEDGE Share:High and low shear rate changes in Rheology

-
Image
Today's KNOWLEDGE Share If a relatively high Mw grade flows from thin to thick, as shown in the picture, and if the time needed to fill the thick section is way shorter than the average polymer relaxation time, the polymer will not be able to reach its higher viscosity (corresponding to higher thickness/lower shear-rate). I am assuming here the polymer reached equilibrium low viscosity in the thin section, say for instance because it is much longer. Any pressure prediction not accounting for transient rheology would then overpredict the pressure to fill.Of course the diverging flow will further complicate the situation and mess with the molecular orientation created in the thin section, but to what extent ? Since this is more of a reasonable "conjecture", don't take this for granted, and discuss or share your opinion in the comments. There are hundreds of Rheology papers on the "4:1 contraction flow". Not sure I have ever seen any on the..."1:4 expansio
Read more