Today's KNOWLEDGE Share : Sandwich Structures

-

Today's KNOWLEDGE Share

Composite materials especially carbon fiber are well known for their excellent strength‑to‑weight ratio. However, there is a way to push this ratio even further: by creating sandwich structures.


A sandwich structure consists of two strong, stiff face sheets (skins) bonded to either side of a lightweight core. The skins carry the in‑plane tensile and compressive loads, while the core maintains the spacing between them increasing the momentum of inertia and resisting shear forces. This makes the structure particularly strong due to the way it distributes loads, working in a similar way to an I‑beam.


By separating the high‑strength material into outer layers, the bending stiffness increases dramatically without a proportional increase in weight. This is why sandwich structures used in sectors wind energy, automotive, & aerospace.


Core Materials for Sandwich Structures

The outer skins of a sandwich structure can be made from many different materials, including metals, but one of the most popular options is composites. For the core, there is also a wide range of materials that pair well with skins made from carbon, aramid or glass fiber.


Foam Core Materials

One of the most popular core material is foam.

PVC (Polyvinyl Chloride) foam is widely used because it is compatible with infusion, prepreg, and RTM processes, and it offers a very favourable balance of cost, processability, and mechanical properties.

PMI (Polymethacrylimide) foam is another popular choice thanks to its excellent specific stiffness and its ability to withstand temperatures up to 180 °C (356 °F), making it highly desirable in automotive & aerospace applications.


Honeycomb Cores

Honeycomb cores have proven particularly effective for withstanding the loads experienced by the core. Several materials can be used in this configuration:

Nomex® aramid honeycomb is very popular in high‑performance applications thanks to its excellent fire resistance, low weight, and dielectric properties.

Thermoplastic honeycomb made from PET or polypropylene is used in lightweight applications requiring some degree of impact resistance.

Aluminium honeycomb offers excellent thermal conductivity and compressive strength. While it is heavier than other options, it can be ideal where extreme lightness is not required. If combined with carbon fiber skins, a protective treatment must be applied to prevent galvanic corrosion from direct contact between the two materials.

 

Natural Core Materials

Two popular natural options for sandwich cores are:

Balsa wood: the lightest known wood, with a long tradition in wind turbine blade manufacturing and marine applications. It must be sealed to prevent moisture absorption, but it offers excellent compressive strength.

Cork: increasingly used for its outstanding acoustic and vibration damping properties, with the added benefit of being a renewable material.


source:Managing Composites


Comments

Post a Comment

Popular posts from this blog

ENVALIOR ANNOUNCES NEW PPS COMPOUNDING FACILITY IN EUROPE

-
Image
Envalior launches new PPS compounding facility in Uerdingen, Germany. New facility supports growing demand for Xytron™ in Europe and the Americas. To better serve growing customer demand in Europe and the Americas, Envalior – a global leader in sustainable and high-performance engineering materials – announces that it will invest in a PPS (Polyphenylene Sulfide) compounding facility in Europe. Envalior’s PPS material Xytron™ combines a strong set of properties, including excellent chemical and hydrolysis resistance at elevated temperatures, extremely stable heat aging performance up to 240°C, very good and stable electrical properties at elevated temperatures, low moisture absorption with high dimensional stability, and inherent flame retardance that meets UL94 V0.  Since 2016, when Xytron™ entered the market, the PPS material has built a strong track record across OEMs and tier customers. The new facility will provide local supply and additional services to customers in Europe whi...
Read more

Today's KNOWLEDGE Share : What Is Going Wrong in UK Plastics Recycling?

-
Image
Today's KNOWLEDGE Share What Is Going Wrong in UK Plastics Recycling? Biffa shut its Sunderland plant. Viridor walked away from Avonmouth and Rochester. Yes Recycling Fife collapsed within a year. All three were backed by major investments All three had buyers lined up for recyclate All three are now offline This is not bad luck It is bad structure Over the next four posts I will break down: 1. Why cheap virgin imports are undercutting UK recyclers 2. How weak policy enforcement is fuelling market failure 3. What volatile PRNs and cheap exports are doing to infrastructure 4. Why demand from brands is softer than their promises Let’s start with the first: **Cheap Virgin Resin = Broken Economics** Virgin PE, PP, and PET have been flooding the global market. New capacity in Asia and the US has driven prices down 30 to 40 percent. Meanwhile, recycled plastic costs more to produce in the UK than it can sell for. We are asking UK recyclers to compete with materials made in places with – ...
Read more

Today's KNOWLEDGE Share : Robotic 3D printing can compete with traditional boatbuilding

-
Image
Today's KNOWLEDGE Share “Robotic 3D printing can compete with traditional boatbuilding”, Simone Barbera and Mattia De Santis, Caracol V2 catamaran was printed in Italy at Caracol’s production center and headquarter in Barlassina, near Milan, with a Heron AM 400, Caracol’s robotic Large Format Additive Manufacturing (LFAM) platform. The lattest was specifically configured with a 7-axis robotic arm mounted on a rail, enabling the printing of parts up to 10 meters in length. How did the collaboration between V2 Group and Caracol come about? Simone Barbera : The collaboration between V2 Group and Caracol originated from a shared vision to revolutionize boat manufacturing through sustainable innovation. V2 Group, a Spanish-company specialized in nautical design and engineering, is seeking to develop electric vessels manufactured sustainably. On the other hand, Caracol, leader in robotic advanced manufacturing technology, had had years of experience working with Large Format Additive Ma...
Read more