Wednesday, May 17, 2023

Engineers design sutures that can deliver drugs or sense inflammation

 The bioderived “smart sutures” could help patients heal after bowel resection or other types of surgery.




Inspired by sutures developed thousands of years ago, MIT engineers have designed “smart” sutures that can not only hold tissue in place, but also detect inflammation and release drugs.

The new sutures are derived from animal tissue, similar to the “catgut” sutures first used by the ancient Romans. In a modern twist, the MIT team coated the sutures with hydrogels that can be embedded with sensors, drugs, or even cells that release therapeutic molecules.

“What we have is a suture that is bioderived and modified with a hydrogel coating capable of being a reservoir for sensors for inflammation, or for drugs such as monoclonal antibodies to treat inflammation. Remarkably, the coating also has the capacity to retain cells that are viable for a prolonged period,” says Giovanni Traverso, an associate professor of mechanical engineering at MIT, a gastroenterologist at Brigham and Women’s Hospital, and the senior author of the study.

The researchers envision that these sutures could help patients with Crohn’s disease heal after surgery to remove part of the intestine. The sutures could also be adapted for use to heal wounds or surgical incisions elsewhere in the body, the researchers say.

Former MIT postdocs Jung Seung Lee and Hyunjoon Kim are the lead authors of the paper, which appears today in the journal Matter.

Inspired by catgut

Catgut sutures — which are made from strands of purified collagen from cows, sheep, or goats (but not cats) — form strong knots that naturally dissolve within about 90 days. Although synthetic absorbable sutures are also available, catgut is still used in many types of surgery.

Traverso and his colleagues wanted to see if they could build on this type of tissue-derived suture to create a material that would be tough and absorbable, and have advanced functions such as sensing and drug delivery.

Such sutures could be particularly useful for Crohn’s disease patients who need to have a part of the intestine removed due to blockage from excessive scarring or inflammation. This procedure requires resealing the two ends left behind after one section of the intestine is removed. If that seal doesn’t hold tightly, it can lead to leaks that are dangerous for the patient.

To help reduce this risk, the MIT team wanted to design a suture that could not only hold the tissue in place but also detect inflammation, an early warning sign that the resealed intestines are not healing properly.

The researchers created their new sutures from pig tissue, which they “decellularized” using detergents, to reduce the chances of inducing inflammation in the host tissue. This process leaves behind a cell-free material that the researchers call “De-gut,” which contains structural proteins such as collagen, as well as other biomolecules found in the extracellular matrix that surrounds cells.

After dehydrating the tissue and twisting it into strands, the researchers evaluated its tensile strength — a measure of how much stretching it can withstand before breaking — and found that it was comparable to commercially available catgut sutures.  They also found that the De-gut sutures induce much less of an immune response from surrounding tissue than traditional catgut.

“Decellularized tissues have been extensively used in regenerative medicine with their superb biofunctionality,” Lee says. “We now suggest a novel platform for performing sensing and delivery using decellularized tissue, which will open up new applications of tissue-derived materials.”

Smart applications

Next, the researchers set out to enhance the suture material with additional functions. To do that, they coated the sutures with a layer of hydrogel. Within the hydrogel, they can embed several types of cargo — microparticles that can sense inflammation, various drug molecules, or living cells.

For the sensor application, the researchers designed microparticles coated with peptides that are released when inflammation-associated enzymes called MMPs are present in the tissue. Those peptides can be detected using a simple urine test.

The researchers also showed that they could use the hydrogel coating to carry drugs that are used to treat inflammatory bowel disease, including a steroid called dexamethasone and a monoclonal antibody called adalimumab. These drugs were carried by microparticles made from FDA-approved polymers such as PLGA and PLA, which are used to control the release rate of drugs. This approach could also be adapted to deliver other kinds of drugs such as antibiotics or chemotherapy drugs, the researchers say.

These smart sutures could also be used to deliver therapeutic cells such as stem cells. To explore that possibility, the researchers embedded the sutures with stem cells engineered to express a fluorescent marker, and found that the cells remained viable for at least seven days when implanted in mice. The cells were also able to produce vascular endothelial growth factor (VEGF), a growth factor that stimulates blood cell growth.

The researchers are now working on further testing each of these possible applications, and on scaling up the manufacturing process for the sutures. They also hope to explore the possibility of using the sutures in parts of the body other than the gastrointestinal tract.

“The decellularized gut suture developed by the MIT team is an exciting platform for sensing and delivering a wide range of therapeutics, including small molecules, biologics, and living cells. The team has done a great job robustly demonstrating the versatility of this platform,” says Omid Veiseh, an associate professor of bioengineering at Rice University, who was not involved in the study.

Other authors of the paper are Gwennyth Carroll, Gary Liu, Ameya Kirtane, Alison Hayward, Adam Wentworth, Aaron Lopes, Joy Collins, Siid Tamang, Keiko Ishida, Kaitlyn Hess, Junwei Li, and Sufeng Zhang.

The research was funded by the Leona M. and Harry B. Helmsley Charitable Trust, the MIT Department of Mechanical Engineering, the National Research Foundation of Korea, and a National Institute of Diabetes and Digestive and Kidney Disease Ruth L. Kirschstein NRSA Fellowship.

Source:Anne Trafton -MIT news office

For detailed news,Pls visit MY BLOG http://polymerguru.blogspot.com


#sutures #surgery #recovery #mit #inflammation #inflammatoryboweldisease #block #patientcare #crohnsdisease


Tuesday, May 16, 2023

LyondellBasell, Invest-NL and Infinity Recycling Invest in Pryme for Advanced Recycling

Infinity Recycling, Invest-NL and LyondellBasell announced they have invested in Pryme N.V., an innovative cleantech company, located in Rotterdam, the Netherlands.



The group of investors contributed nearly EUR 13 million to support the commercialization of Pryme’s pyrolysis process to convert used plastic into valuable products on an industrial scale. Pryme is currently building an advanced recycling plant in Rotterdam that is expected to start production later this year and plans to build a second larger-scale plant in 2025.


Cost-effective Approach to Pyrolysis with High Conversion Rate:

“We are excited to welcome this group of strong investors at our side,” said Chris Herve, CEO of Pryme. “Just like earlier investments by Infinity Recycling and Stichting Multistrat opened doors and allowed us to gain important market knowledge, we expect our new investors to each bring valuable experience and perspective to further develop our technology. With this dedicated support comes responsibility and expectation to deliver – a challenge we gladly accept.”


Pryme has developed a new cost-effective approach to pyrolysis that allows used plastic to be recycled with a high conversion rate, on an industrial scale and with a lower carbon footprint. With the new capital, Pryme aims to accelerate the roll-out of this technology to help reduce the amount of plastic being incinerated or ending up in the environment.


Jeroen Kelder, managing partner, Infinity Recycling, said, “Infinity Recycling is pleased to announce that it has successfully assembled a strong consortium of investors to support its portfolio company Pryme in its next phase of growth. We are proud to have facilitated this important milestone for Pryme and are confident that this backing will be instrumental in its continued success.”


We are pleased to invest in Pryme in close cooperation with our portfolio fund Infinity Recycling and LyondellBasell. This investment round is a significant milestone for scaling up Pryme’s advanced recycling capacities, which are critical to address those parts of the plastic waste streams that cannot be recycled through mechanical technologies. It clearly underlines the strong position of the Netherlands to address the plastic waste crisis.”


“With increasing demand from society and customers for more circular products, we are thrilled to invest in fast-growing companies like Pryme to support the scale-up of new advanced recycling commercial operations and reduce the volume of used plastic sent to incineration.This investment supports our strategy to grow our circular and low carbon solutions, as we intend to use part of the pyrolysis oil produced from this new Pryme facility in our planned integrated hub in Cologne, Germany.”


Source: LyondellBasell/Omnexus.specialchem.com

Visit MY BLOG http://polymerguru.blogspot.com


#plastics #plasticsengineering #recycling



Monday, May 15, 2023

Today's KNOWLEDGE Share:GF Filled Polymer

Today's KNOWLEDGE Share:

GF Filled Polymer

Let's imagine we do a fatigue test on a 40% GF filled polymer. Visually, such material will always show what appears to be a brittle failure.


Even a less severe quasi-static tensile test will typically show failure at 1 or 1.5 % strain, which we mentally associate with "BRITTLE FAILURE".





However, you'd be surprised to see to what an extent such failures are largely due to plasticity/ductile mechanisms.

If we do our fatigue test (with a classic stress ratio R=0.1 ) at 1 Hz and then we repeat it on a fresh sample at 2 Hz, very often we will observe that life-time is the same, despite doubling the number of cycles ! This indicates that failure is essentially controlled by the underlying creep and accumulated plastic strain. A totally ductile mechanism !


If we were to observe failure two times faster, i.e. at the same number of cycles, this would point towards a dominant crack growth/brittle mechanism.


In real life, we may also find something in between, demonstrating that failure mechanisms are often the result of concurrent damage mechanisms involving plasticity and cavitation. This is what modern "progressive damage" models (e-Xstream engineering, part of Hexagon’s Manufacturing Intelligence division for instance) will implement.


Source:VITO LEO

Visit MY BLOG http://polymerguru.blogspot.com


#polymers #plasticsengineering #glassfiber #damage #fracture #tensile #crack #polymerscience


Sunday, May 14, 2023

JOB VACANCY:PRODUCTION MANAGER

 JOB VACANCY:

We are looking for *Production Manager* for our German based MNC manufacturing company at Sriperumbudur(Tamilnadu)

Industry: Rubber/ Extrusion/Moulding/EPDM Mixing.


Designation: Manager Production.

No. Of : 01

Experience: 14 - 18 years .

Salary: 08 Lakhs to 10 Lakhs per annum.

Interested share your CV : hrgssg.cn@goldseal.in


Gold Seal SaarGummi India Pvt Ltd,

No. 157, Pondur Village, Sriperumbudur, Chennai, - 602105.



Today's KNOWLEDGE Share:

CarbonCast: C-GRID carbon fiber grid used in precast insulated wall panels


C-GRID is a carbon fiber grid, the enabling technology that gives CarbonCast products their outstanding strength and thermal efficiency.





How was C-GRID developed?

C-GRID was first developed by Chomarat over 20 years ago in collaboration with Oldcastle Precast, a founding member of AltusGroup. C-GRID’s strength, non-corrosiveness and ultra-low thermal conductivity made it an idea connector truss for insulated precast wall panels.


Manufacturing technique produces C-GRID

C-GRID is formed in a continuous rotary laid-scrim process in which machine and cross direction carbon tows are aligned in a 0/90-degree orientation and then impregnated with a proprietary thermoset epoxy resin system.


Strength:

C-GRID’s strength is achieved by selecting large carbon tows with high tensile strength values and impregnating them in our proprietary epoxy resin system. 


Depending on the requirements of the application, we can design specific C-GRID constructions to meet requirements. Adjusting the tow size and spacing controls the tensile strength of the reinforcement per square foot.


What are the thermal conductivity characteristics of C-GRID, and how does that benefit the insulated precast panel in?

As a nonmetallic connector, C-GRID has the benefit of ultra-low thermal conductivity. This enables precast producers to manufacture highly efficient insulated wall panels that significantly lower annual heating and cooling costs.


Chemical composition of the epoxy resin used in C-GRID:

Chomarat developed a two-component high Tg epoxy system for C-GRID that helps precasters meet fire rating requirements for precast insulated wall panels.


How is C-GRID’s design tailored for specific applications?

With a range of carbon tow strand size from 3K to 60K and strand spacing of 1 inch to 4 inches, we can offer engineers a very wide range of strengths and grid apertures to meet their specific requirements. 


Source:John Leatham-Chomarat/JEC Composites

Visit MY BLOG http://polymerguru.blogspot.com


#composites #panels #epoxy #carbonfiber #thermalconductivity #noncorrosive

Friday, May 12, 2023

Today's KNOWLEDGE Share:Notched testing of sandwich composites

Today's KNOWLEDGE Share:


Notched testing of sandwich composites: The sandwich open-hole flexure test!


"A primary reason for having two notch sensitivity test methods for composite laminates is the difference in failure modes and resulting notch sensitivities under tension and compression loading. Sandwich composites are commonly subjected to flexural loading, resulting in a tension-loaded facesheet and a compression-loaded facesheet. When using fiber-reinforced composite facesheets, the compression-loaded facesheet typically fails first." 





"Additionally, sandwich composites are used in compression-loading applications, and their notched strengths under compression and flexural loading are typically not the same. Therefore, even though failure primarily occurs in compression-loaded facesheets, two separate test methods are desired." 


"The new sandwich OHF test standard is designated as an ASTM standard practice, as it provides only supplemental instructions for modifying the sandwich long beam flexure test method, ASTM D72495, for use with open-hole sandwich specimens. As in all other ASTM notch sensitivity tests for composite laminates and sandwich composites, a specimen width-to-hole diameter ratio of 6:1 is used. This ratio has been widely accepted in the aerospace composites community for producing acceptable notched strength reductions while minimizing the interaction between the centrally located open through-hole and the specimen edges." 


Source:#managingcomposites/#thenativelab

Visit MY BLOG http://polymerguru.blogspot.com


#composites #testing #notch #aerospace #laminate


Thursday, May 11, 2023

Today's KNOWLEDGE share:Warpage of a GF filled nylon

Today's KNOWLEDGE share:


Warpage of a GF filled nylon part is extremely dependent on temperature and moisture uptake.


Temperature increase is responsible for matrix expansion (negligible for the fibers though), and moisture uptake produces matrix swell (again GF does not care much).





So if a part is warped when dry as molded at room temperature (that is what simulation codes will predict for you !!) it will tend to "UNWARP" as you heat the part or let it uptake moisture.


This effect can perfectly be simulated, if you account properly for the anisotropic elastic properties and fiber orientation and know the swell rate with water uptake.

For temperature induced UNWARP you will need detailed Coefficient of Thermal Expansion CTE (T) in x, y and z though to get it right ! Those CTE's, with the needed level of detail, are not available directly from Flow Analysis codes for the moment, but e-Xstream engineering, part of Hexagon’s Manufacturing Intelligence division Digimat software can provide those.


Source:VITO LEO

Visit MY BLOG http://polymerguru.blogspot.com


#plastics #polymerscience #injectionmolding #moisture #glassfiber #nylon #warpage #thermal

Sunday's THOUGHTFUL POST : THE “BENT KEY PRINCIPLE”

 🔑 THE “BENT KEY PRINCIPLE” How a Tiny Mistake Inside Toyota’s Factory Created One of the Most Powerful Ideas in Modern Business In the ear...