Posts

𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 : 𝐁𝐞𝐭𝐭𝐞𝐫 𝐬𝐞𝐚𝐥𝐢𝐧𝐠. 𝐋𝐞𝐬𝐬 𝐥𝐞𝐚𝐤𝐚𝐠𝐞. 𝐒𝐦𝐚𝐫𝐭𝐞𝐫 𝐦𝐨𝐥𝐝 𝐝𝐞𝐬𝐢𝐠𝐧.

Image
𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 💡 𝐁𝐞𝐭𝐭𝐞𝐫 𝐬𝐞𝐚𝐥𝐢𝐧𝐠. 𝐋𝐞𝐬𝐬 𝐥𝐞𝐚𝐤𝐚𝐠𝐞. 𝐒𝐦𝐚𝐫𝐭𝐞𝐫 𝐦𝐨𝐥𝐝 𝐝𝐞𝐬𝐢𝐠𝐧. When it comes to applications where preventing leakage is critical, 2K (two-component) injection molding with elastomers can make a real difference. By combining rigid plastics with elastomeric materials in a single molded component, we can create integrated sealing areas that bring several advantages: 🔹 𝐈𝐦𝐩𝐫𝐨𝐯𝐞𝐝 𝐬𝐞𝐚𝐥𝐢𝐧𝐠 𝐩𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: Elastomers provide flexibility and compression in critical areas, helping prevent fluid or air leakage. 🔹 𝐅𝐞𝐰𝐞𝐫 𝐚𝐬𝐬𝐞𝐦𝐛𝐥𝐲 𝐨𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬: Integrating sealing elements directly into the part reduces the need for additional seals, gaskets or manual assembly. 🔹 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐭 𝐪𝐮𝐚𝐥𝐢𝐭𝐲: A properly designed 2K mold ensures repeatable positioning and bonding of the elastomer, contributing to reliable sealing performance. 🔹 𝐁𝐞𝐭𝐭𝐞𝐫 𝐩𝐫𝐨𝐝𝐮𝐜𝐭 𝐢𝐧𝐭𝐞𝐠𝐫...

𝐒𝐮𝐧𝐝𝐚𝐲'𝐬 𝐓𝐇𝐎𝐔𝐆𝐇𝐓𝐅𝐔𝐋 𝐏𝐨𝐬𝐭 : 𝐓𝐎𝐎𝐋𝐒 𝐅𝐎𝐑 𝐏𝐎𝐋𝐘𝐌𝐄𝐑 𝐑𝐄𝐒𝐄𝐀𝐑𝐂𝐇

Image
𝐒𝐮𝐧𝐝𝐚𝐲'𝐬 𝐓𝐇𝐎𝐔𝐆𝐇𝐓𝐅𝐔𝐋 𝐏𝐨𝐬𝐭 𝐓𝐎𝐎𝐋𝐒 𝐅𝐎𝐑 𝐏𝐎𝐋𝐘𝐌𝐄𝐑 𝐑𝐄𝐒𝐄𝐀𝐑𝐂𝐇 In the world of polymer science, having the right digital tools is absolutely essential. Throughout my career in this field, I've had the opportunity to utilize a diverse range of powerful software. From unraveling molecular structures to predicting material behavior, these programs play a crucial role in driving innovation.  Below, I'm sharing a quick guide to some key tools and what they're used for. Please keep in mind that this is just a glimpse into the vast array of specialized software available that empowers us in polymer research every day. source : Roberto YAÑEZ, PhD #PolymerScience #ScientificSoftware #DataAnalysis #Innovation #MaterialCharacterization #Research

𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 : 𝐇𝐨𝐰 𝐌𝐮𝐜𝐡 𝐃𝐢𝐬𝐩𝐞𝐫𝐬𝐚𝐧𝐭 𝐒𝐡𝐨𝐮𝐥𝐝 𝐘𝐨𝐮 𝐀𝐝𝐝? 𝟑 𝐒𝐭𝐞𝐩𝐬 𝐭𝐨 𝐅𝐢𝐧𝐝 𝐭𝐡𝐞 𝐑𝐢𝐠𝐡𝐭 𝐃𝐨𝐬𝐚𝐠𝐞

Image
𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 𝐇𝐨𝐰 𝐌𝐮𝐜𝐡 𝐃𝐢𝐬𝐩𝐞𝐫𝐬𝐚𝐧𝐭 𝐒𝐡𝐨𝐮𝐥𝐝 𝐘𝐨𝐮 𝐀𝐝𝐝? 𝟑 𝐒𝐭𝐞𝐩𝐬 𝐭𝐨 𝐅𝐢𝐧𝐝 𝐭𝐡𝐞 𝐑𝐢𝐠𝐡𝐭 𝐃𝐨𝐬𝐚𝐠𝐞 Adding too much dispersant wastes money. Adding too little can compromise dispersion efficiency. So, how do you determine the optimal dosage? The answer is not simply based on pigment loading. It depends largely on the total surface area of the pigment particles that needs to be covered. Here are three practical steps to find the right dosage. **STEP 1 | Start with Experience-Based Ratios** A common starting point is to calculate the active dispersant content as a percentage of pigment weight. Typical reference ranges: • Inorganic pigments (TiO₂, iron oxide): 1–3% • General organic pigments: 3–8% • Difficult-to-disperse organic pigments: 8–15% • High-color carbon black: 30–100% or higher For example, to disperse 100 g of organic pigment at 4% active dispersant, using a product with 40% solids: Actual addition = 4% ÷ ...

𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 : 𝐂𝐡𝐢𝐧𝐚 𝐢𝐬 𝐧𝐨𝐰 𝐭𝐮𝐫𝐧𝐢𝐧𝐠 𝐛𝐚𝐦𝐛𝐨𝐨 𝐢𝐧𝐭𝐨 𝐛𝐚𝐭𝐭𝐞𝐫𝐲 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥 𝐛𝐲 𝐭𝐡𝐞 𝐭𝐞𝐧𝐬 𝐨𝐟 𝐭𝐡𝐨𝐮𝐬𝐚𝐧𝐝𝐬 𝐨𝐟 𝐭𝐨𝐧𝐧𝐞𝐬.

Image
𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 𝐂𝐡𝐢𝐧𝐚 𝐢𝐬 𝐧𝐨𝐰 𝐭𝐮𝐫𝐧𝐢𝐧𝐠 𝐛𝐚𝐦𝐛𝐨𝐨 𝐢𝐧𝐭𝐨 𝐛𝐚𝐭𝐭𝐞𝐫𝐲 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥 𝐛𝐲 𝐭𝐡𝐞 𝐭𝐞𝐧𝐬 𝐨𝐟 𝐭𝐡𝐨𝐮𝐬𝐚𝐧𝐝𝐬 𝐨𝐟 𝐭𝐨𝐧𝐧𝐞𝐬. Two recent projects show how quickly this is moving from the laboratory to the factory. In Anhui, Hefei Guoke Tanxin has signed an agreement with the Ningguo city government to build a plant that will make 15,000 tonnes of hard carbon and porous carbon a year. The RMB 200 million plant is due to begin production in the second half of 2027. The company was set up to commercialise research from the University of Science and Technology of China, and it reports that its bamboo-based carbon keeps more than 80% of its performance at minus 30°C. In Hunan, Hunan Yuanchen has received environmental approval for a plant in Taojiang that will turn offcuts from #bamboo product factories into 10,000 tonnes of bamboo carbon a year. Part of this will be processed further into 3,000 tonnes of porous ...

𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 : 𝐔𝐧𝐝𝐞𝐫𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐭𝐡𝐞 𝐊𝐞𝐲 𝐂𝐚𝐮𝐬𝐞𝐬 𝐨𝐟 𝐃𝐞𝐥𝐚𝐦𝐢𝐧𝐚𝐭𝐢𝐨𝐧 𝐢𝐧 𝐆𝐑𝐏 𝐋𝐚𝐦𝐢𝐧𝐚𝐭𝐢𝐨𝐧 𝐉𝐨𝐢𝐧𝐭𝐬

Image
𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 𝐔𝐧𝐝𝐞𝐫𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐭𝐡𝐞 𝐊𝐞𝐲 𝐂𝐚𝐮𝐬𝐞𝐬 𝐨𝐟 𝐃𝐞𝐥𝐚𝐦𝐢𝐧𝐚𝐭𝐢𝐨𝐧 𝐢𝐧 𝐆𝐑𝐏 𝐋𝐚𝐦𝐢𝐧𝐚𝐭𝐢𝐨𝐧 𝐉𝐨𝐢𝐧𝐭𝐬 Delamination in Glass-Reinforced Plastic (GRP) lamination joints is a serious fabrication defect that can compromise structural integrity, mechanical strength, and long-term service performance. From a GRP fabrication and quality-control perspective, the following are the major contributing factors: 1. Inadequate Surface Preparation: Dust, oil, grease, moisture, and other contaminants can prevent proper resin adhesion. Insufficient abrasion of existing cured laminate surfaces is also a common cause of bonding failure. 2. Incorrect Resin Mixing and Application: Incorrect resin-to-catalyst ratios, inadequate mixing, poor fibre impregnation, and improper application techniques can result in weak bonding and air entrapment. 3. Improper Curing Conditions: Insufficient curing time, unsuitable ambient or substrate ...

𝐅𝐢𝐫𝐬𝐭 𝐆𝐫𝐚𝐩𝐡𝐞𝐧𝐞 𝐭𝐨 𝐜𝐨𝐥𝐥𝐚𝐛𝐨𝐫𝐚𝐭𝐞 𝐰𝐢𝐭𝐡 𝐔𝐍𝐈𝐓𝐄𝐗 𝐟𝐨𝐫 𝐜𝐚𝐫𝐛𝐨𝐧 𝐟𝐢𝐛𝐫𝐞 𝐜𝐨𝐦𝐩𝐨𝐬𝐢𝐭𝐞𝐬

Image
  𝐅𝐢𝐫𝐬𝐭 𝐆𝐫𝐚𝐩𝐡𝐞𝐧𝐞 𝐭𝐨 𝐜𝐨𝐥𝐥𝐚𝐛𝐨𝐫𝐚𝐭𝐞 𝐰𝐢𝐭𝐡 𝐔𝐍𝐈𝐓𝐄𝐗 𝐟𝐨𝐫 𝐜𝐚𝐫𝐛𝐨𝐧 𝐟𝐢𝐛𝐫𝐞 𝐜𝐨𝐦𝐩𝐨𝐬𝐢𝐭𝐞𝐬 First Graphene has signed a joint development and commercialisation agreement with UNITEX Composite to advance graphene enhanced carbon fibre composites. The two parties will work together to develop and commercialise graphene-enhanced carbon fibre prepreg, before expanding into thermoplastics, resin concentrates, coatings, and elastomers. Starting with the #prepreg , the collaboration will build on First Graphene’s internal research and development activities. The company has demonstrated improvements in both strength and barrier properties by incorporating graphene into #carbonfibrecomposites . If results justify further development, #FirstGraphene and UNITEX will progress successful formulations through customer validation, manufacturing scale-up, and commercialisation. This agreement will combine First Graphene’s formulation and dispersion experti...

𝐁𝐀𝐒𝐅 𝐞𝐧𝐝𝐬 𝐞𝐟𝐟𝐨𝐫𝐭𝐬 𝐭𝐨 𝐚𝐜𝐪𝐮𝐢𝐫𝐞 𝐄𝐯𝐨𝐧𝐢𝐤 𝐚𝐧𝐝 𝐫𝐞𝐚𝐟𝐟𝐢𝐫𝐦𝐬 𝐝𝐢𝐬𝐜𝐢𝐩𝐥𝐢𝐧𝐞𝐝 𝐚𝐩𝐩𝐫𝐨𝐚𝐜𝐡 𝐭𝐨 𝐜𝐚𝐩𝐢𝐭𝐚𝐥 𝐚𝐥𝐥𝐨𝐜𝐚𝐭𝐢𝐨𝐧

Image
BASF SE today announced that it will end its efforts to acquire Evonik Industries AG (Evonik). The decision follows Evonik’s rejection of two non-binding all-cash offers made by BASF. Despite the indication that BASF was prepared to consider a further moderate increase to its offer, the Executive Board of Evonik has not shown meaningful engagement until today. At the same time, BASF’s assessment of Evonik’s standalone prospects and associated risks did not provide sufficient grounds to justify a higher valuation. Against this background, BASF does not consider it to be in the best interests of its shareholders to pursue the transaction at a higher price. “We are convinced that BASF’s derisked all-cash offer of 24 euros per share would have represented significant additional value for Evonik shareholders,” said Dr. Markus Kamieth, Chairman of the Board of Executive Directors of #BASFSE . “We continue to believe that the combination would create a more powerful #chemical company under B...