𝐂𝐨𝐯𝐞𝐬𝐭𝐫𝐨 𝐚𝐧𝐝 𝐅𝐫𝐚𝐮𝐧𝐡𝐨𝐟𝐞𝐫 𝐔𝐌𝐒𝐈𝐂𝐇𝐓 𝐭𝐮𝐫𝐧 𝐞𝐧𝐝-𝐨𝐟-𝐥𝐢𝐟𝐞 𝐯𝐞𝐡𝐢𝐜𝐥𝐞 𝐰𝐚𝐬𝐭𝐞 𝐢𝐧𝐭𝐨 𝐛𝐚𝐬𝐢𝐜 𝐜𝐡𝐞𝐦𝐢𝐜𝐚𝐥𝐬

Covestro, the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT, and Carbon Minds GmbH have launched the #CARBEX research project. The joint project aims to validate a recycling process for recovering the aromatics benzene, toluene, ethylbenzene and xylenes (BTEX) from #automotiveshredderresidue (ASR) – a waste stream from #automotiverecycling that is still largely incinerated today. Covestro is leading the project’s industrial activities.

BTEX aromatics are essential building blocks for the chemical industry. Covestro uses benzene as a feedstock to produce #MDI (methylene diphenyl diisocyanate) and toluene to produce TDI (toluene diisocyanate). MDI is used, for example, to make #insulationfoams for buildings and refrigerators, as well as structural and acoustic components for vehicles. TDI is used to produce flexible foams for mattresses, upholstered furniture and car seats.

At the end of a vehicle’s life, components like these, which contain significant amounts of polyurethane, can end up back in automotive shredder residue. This means CARBEX could help close the loop in automotive recycling.


“With CARBEX, we are tapping into a source of carbon that is currently mostly burned,” says Dr. Stefanie Eiden, Project Manager at Covestro. “If we can recover benzene and toluene from automotive shredder residue at the quality required for our MDI and TDI production processes, we can close a material loop while replacing an emissions-intensive step in the production of basic chemicals.”


#Aromatics are mainly produced today through the steam cracking of fossil-based naphtha. In Germany alone, this process generates around 8 million metric tons of CO₂e in direct process emissions every year, in addition to approximately 11 million metric tons associated with crude oil extraction and naphtha production.


At the same time, more than 466,000 metric tons of automotive shredder residue (ASR) are generated in Germany each year. Around 210,000 metric tons are used for energy recovery or disposed of. On average, #polyurethane accounts for 20% of this waste stream by weight, although the share can vary significantly depending on its source.


Pyrolysis coke becomes a catalyst

CARBEX is based on Fraunhofer UMSICHT’s patented Pyromat technology. It combines #pyrolysis with a subsequent autocatalytic reforming process, in which the pyrolysis coke generated during the process itself is used as both a catalyst and an adsorbent.


At temperatures of around 500°C, components of the coke such as calcium carbonate, titanium dioxide and copper promote the formation of aromatic compounds. At the same time, they bind halogens such as chlorine and bromine, preventing them from entering the pyrolysis oil. This eliminates the need for an expensive external catalyst, which would quickly lose its effectiveness due to contaminants in real-world waste streams.


In preliminary laboratory-scale tests using automotive shredder residue (ASR), #FraunhoferUMSICHT achieved a BTEX content of 62% by weight in the pyrolysis oil – around 60% higher than in conventional pyrolysis oils – and reduced the halogen content by up to 99%. According to the institute’s calculations, process-related emissions from the Pyromat process amount to around 1.1 metric tons of CO₂e per metric ton of BTEX, almost 40% lower than the 1.6 to 1.8 metric tons associated with steam cracking.


“The Pyromat technology uses pyrolysis coke as both a catalyst and an adsorbent. This makes the process robust and cost-effective, especially when dealing with highly contaminated waste streams,” explains Dr. Thomas Fehn, Project Manager at Fraunhofer UMSICHT’s Sulzbach-Rosenberg branch. “As part of the project, we are taking this approach from the laboratory to continuous pilot-scale operation at a throughput of 10 kilograms per hour.”

According to market studies, widespread industrial adoption of the process could reduce CO₂e in Germany by up to 640,000 metric tons per year. It would also reduce raw material-related emissions by replacing fossil-based naphtha.


From waste to isocyanates

CARBEX covers the entire value chain, from BTEX production to its use in industrial applications. Fraunhofer UMSICHT is adapting its existing pyrolysis plant, converting a fixed-bed reactor into a moving-bed reactor and identifying stable operating conditions. The aim is to produce at least 50 kilograms of BTEX-rich pyrolysis oil with halogen levels below 30 ppm – the threshold for further processing in large-scale industrial plants.


Covestro is developing a model-based separation process to recover the individual aromatics benzene and toluene from the pyrolysis oil through distillation. It will then validate their suitability for use in MDI and TDI production and carry out a techno-economic assessment. As an independent partner, Carbon Minds GmbH is responsible for the ISO-compliant cradle-to-gate life cycle assessment (LCA) of the new value chain.


Closing material loops and meeting recycling targets:

The potential is significant. Industry analyses show that more than 2.6 million metric tons of aromatics are produced in Germany every year, with a market value of around €1.95 billion. At the same time, regulatory requirements for recycling are becoming stricter. For example, the EU End-of-Life Vehicles Regulation (ELVR) will introduce mandatory recycled-content targets for plastics used in vehicles from 2032. Part of the recycled material will have to come from end-of-life vehicles. Polyurethane chemically recycled through the CARBEX process could help meet these requirements.


The CARBEX project (September 2026 to August 2029) is funded by the German Federal Ministry of Research, Technology and Space under its “Avoiding Climate-Relevant Process Emissions in Industry” (KlimPro-Industrie II) funding program.


source : Covestro

Comments

Popular posts from this blog

Today's KNOWLEDGE Share : Robotic 3D printing can compete with traditional boatbuilding

Today's KNOWLEDGE Share : A BUG IN INJECTION MOLDING

𝐓𝐨𝐝𝐚𝐲'𝐬 𝐊𝐍𝐎𝐖𝐋𝐄𝐃𝐆𝐄 𝐒𝐡𝐚𝐫𝐞 : 𝐀𝐍𝐓𝐈-𝐎𝐗𝐈𝐃𝐀𝐍𝐓 – 𝐓𝐡𝐞𝐫𝐦𝐚𝐥 𝐚𝐧𝐝 𝐏𝐫𝐨𝐜𝐞𝐬𝐬 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧