๐„๐ฅ๐ข๐ฑ ๐๐จ๐ฅ๐ฒ๐ฆ๐ž๐ซ๐ฌ ๐ˆ๐ง๐ญ๐ซ๐จ๐๐ฎ๐œ๐ž๐ฌ ๐‹๐จ๐ฐ-๐†๐ฅ๐จ๐ฌ๐ฌ ๐๐‚/๐€๐๐’ ๐†๐ซ๐š๐๐ž๐ฌ ๐Ÿ๐จ๐ซ ๐€๐ฎ๐ญ๐จ๐ฆ๐จ๐ญ๐ข๐ฏ๐ž ๐ˆ๐ง๐ญ๐ž๐ซ๐ข๐จ๐ซ๐ฌ

Elix Polymers is expanding its portfolio for #automotive applications with the introduction of “#ElixPC/ABS GR 5125”, a new #PC/ABS grade developed for visible interior components. The material is designed to deliver a very low-gloss surface while retaining the mechanical and thermal performance required for demanding automotive interior applications.

The grade is targeted at matte and low-reflection surfaces used in instrument panels, center consoles, decorative trim, door panels and air vents. According to #ElixPolymers, the material reduces surface gloss without significantly affecting impact strength, heat resistance, dimensional stability or processability. Low volatile organic compound (VOC) emissions and low odor levels are additional features, addressing increasingly stringent requirements for vehicle interior air quality.


“Elix PC/ABS GR 5125” is formulated for injection molding. Available product data describe the material as a commercially available PC/ABS blend combining high impact strength, heat resistance and low emissions. Elix Polymers is positioning the grade for applications that require a balance of matte appearance, mechanical durability and thermal stability.


The company is also introducing a version within its “E-Loop” portfolio. Announced for Fakuma 2026, “Elix E-Loop PC/ABS GR 5125 MR LNS100” contains mechanically recycled post-consumer material. In addition to its low-gloss appearance, the recycled-content grade is said to offer high thermal stability, low emissions of volatile substances and high impact strength, including at temperatures as low as -40°C.


The development reflects the growing use of matte and low-reflection surfaces in automotive interiors, alongside rising requirements for low emissions, reduced odor, long-term durability and increased recycled content. The new PC/ABS grades are aimed at automotive OEMs and Tier 1 suppliers producing visible interior components.


The market launch is scheduled for Fakuma 2026.


Fakuma 2026

Friedrichshafen, Germany

October 12–16, 2026

Hall B5, Booth 5004


source : Plasticker

Comments

Post a Comment

Popular posts from this blog

Today's KNOWLEDGE Share : Robotic 3D printing can compete with traditional boatbuilding

Image
Today's KNOWLEDGE Share “Robotic 3D printing can compete with traditional boatbuilding”, Simone Barbera and Mattia De Santis, Caracol V2 catamaran was printed in Italy at Caracol’s production center and headquarter in Barlassina, near Milan, with a Heron AM 400, Caracol’s robotic Large Format Additive Manufacturing (LFAM) platform. The lattest was specifically configured with a 7-axis robotic arm mounted on a rail, enabling the printing of parts up to 10 meters in length. How did the collaboration between V2 Group and Caracol come about? Simone Barbera : The collaboration between V2 Group and Caracol originated from a shared vision to revolutionize boat manufacturing through sustainable innovation. V2 Group, a Spanish-company specialized in nautical design and engineering, is seeking to develop electric vessels manufactured sustainably. On the other hand, Caracol, leader in robotic advanced manufacturing technology, had had years of experience working with Large Format Additive Ma...
Read more

Today's KNOWLEDGE Share : A BUG IN INJECTION MOLDING

Image
Today's KNOWLEDGE Share A bug in injection molding – an injection-molded part in a bug? Neither! Nature and injection molding have reached similar results. Nature created the first micro-gear long before any human engineering existed. One such example is the Issus coleoptratus (shown in the picture). Furthermore, only now are we reaching the point where injection-molded polymer microgears can approach this level of performance. Looking at the images, which one do you think is the natural gear, and which one is the molded version? It is not that easy to tell, right? Their appearance and operating principles are surprisingly similar. Chitin, a natural linear polymer, forms what nature essentially "molds” into shape. In engineering, we rely on advanced technical polymers to produce similar geometry through actual injection molding. They are not the same material, yet they solve the same issue: Stiffness, dimensional stability, and reliable function at a scale where tolerances...
Read more

Lummus Technology announced Vioneo has selected its Novolen®

Image
polypropylene (PP) technology for a new grassroots plant in #Antwerp , Belgium. The plant will be part of Vioneo’s complex that, once complete, will be the world’s first industrial scale fossilfree plastics production complex. The complex, based on green methanol as feedstock, will also be highly electrified using renewableelectricity and use renewable hydrogen as key components to its operations. The first-of-its-kind plant will have a capacity of 200 kta and will use 100pc segregated green #propylene and #ethylene as feedstock to produce a wide range of #PP grades. With high-purity feedstock and proven technology, PP will serve as a direct drop-in replacement for fossil-based alternatives. The plastics produced will be fully traceable and #CO2negative , allowing customers to reduce their #Scope3 #emissions . Earlier this year, Vioneo and Honeywell announced that Honeywell’s advanced (methanol-to-olefin MTO) technology will be used by Vioneo to produce greenolefins for the comple...
Read more