Motherson & PureCycle Produced Class-A Surface Automotive Bumper Prototype with 30% Recycled Polypropylene

PureCycle Technologies Inc. (Nasdaq: PCT), a U.S.-based company revolutionizing plastic recycling, and the Modules & Polymer Products Division of Motherson today announced the successful production of a Class-A surface automotive bumper prototype incorporating 30% PureFive® recycled polypropylene. The two companies will share details with the global automotive and sustainability communities at the Stuttgart, Germany Startup Autobahn Expo, the world’s largest automotive innovation platform, on July 2, 2026.

The bumper prototype was produced at Motherson’s facility in Tuscaloosa, Alabama, with feasibility assessment and testing led by the Global Innovation Team in Germany. The component has since undergone rigorous performance tests, including climate testing and mechanical properties evaluation. The results will be part of the presentation at this week’s conference.


Fabian Wehrle, Global Innovation Exterior Engineer at Motherson, says: “This collaboration with PureCycle is an important step toward integrating recycled materials into applications that meet the high requirements of premium OEMs for Class-A surfaces. We want to evaluate this through extensive testing to meet the expectations of our customers in the automotive industry and to comply with the requirements of the EU End-of-Life Vehicles Directive.


The timing of this achievement is critical. The European Union’s End-of-Life Vehicles (ELV) Regulation is creating binding requirements for automakers and their supply chains. By 2032, pending final adoption, new vehicles must contain at least 15% recycled plastic content, with a minimum of 3% sourced from end-of-life vehicles. By 2036, those thresholds increase to 25% and 5%, respectively. Exterior components such as bumpers are directly within scope.


PureCycle’s patented dissolution recycling process removes color, odor, and contaminants from post-consumer polypropylene, producing PureFive® resin with properties similar to virgin material. PureFive® is third-party certified for recycled content, providing the traceability and documentation that OEMs and regulators will require for mandate compliance.

For automakers and Tier 1 suppliers targeting the European market, the Motherson–PureCycle bumper prototype provides a scalable blueprint for 2032 compliance. PureCycle is further expanding its production footprint to serve European customers directly, with a new dissolution recycling facility under development at the port of Antwerp in Belgium, expected to be operational in 2029.


“This bumper represents exactly why there is such excitement around PureCycle and dissolution recycling,” said Nicolas Elwing, PureCycle’s Senior Director of Commercial in Europe. “For years, the automotive industry has been working to combine recycled materials with Class A quality. In collaboration with Motherson, there are now promising approaches to making this a reality.


Elwing continued, “With EU ELVR mandates approaching and OEMs searching for qualified, traceable recycled material, PureFive® is ready to be that solution. We look forward to sharing the news about this breakthrough at Startup Autobahn Expo.


The collaboration between Motherson and PureCycle lays the foundation for continued work on automotive-grade material specifications, evaluating mass production with PureFive®, and advancing the long-term goal of a closed-loop recycling system “from bumper to bumper.” Future development goals also include increasing the recycled content to over 30% and expanding into additional PP applications for exterior and interior applications.


In addition to the Belgium facility, PureCycle is building a new dissolution recycling facility in Rayong, Thailand. Both facilities are expected to be operational before 2030, expanding PureCycle’s global capacity to serve the automotive supply chain as ELVR mandate deadlines approach.


source : PureCycle

Comments

Post a Comment

Popular posts from this blog

Today's KNOWLEDGE Share : Robotic 3D printing can compete with traditional boatbuilding

Image
Today's KNOWLEDGE Share “Robotic 3D printing can compete with traditional boatbuilding”, Simone Barbera and Mattia De Santis, Caracol V2 catamaran was printed in Italy at Caracol’s production center and headquarter in Barlassina, near Milan, with a Heron AM 400, Caracol’s robotic Large Format Additive Manufacturing (LFAM) platform. The lattest was specifically configured with a 7-axis robotic arm mounted on a rail, enabling the printing of parts up to 10 meters in length. How did the collaboration between V2 Group and Caracol come about? Simone Barbera : The collaboration between V2 Group and Caracol originated from a shared vision to revolutionize boat manufacturing through sustainable innovation. V2 Group, a Spanish-company specialized in nautical design and engineering, is seeking to develop electric vessels manufactured sustainably. On the other hand, Caracol, leader in robotic advanced manufacturing technology, had had years of experience working with Large Format Additive Ma...
Read more

Today's KNOWLEDGE Share : What Is Going Wrong in UK Plastics Recycling?

Image
Today's KNOWLEDGE Share What Is Going Wrong in UK Plastics Recycling? Biffa shut its Sunderland plant. Viridor walked away from Avonmouth and Rochester. Yes Recycling Fife collapsed within a year. All three were backed by major investments All three had buyers lined up for recyclate All three are now offline This is not bad luck It is bad structure Over the next four posts I will break down: 1. Why cheap virgin imports are undercutting UK recyclers 2. How weak policy enforcement is fuelling market failure 3. What volatile PRNs and cheap exports are doing to infrastructure 4. Why demand from brands is softer than their promises Let’s start with the first: **Cheap Virgin Resin = Broken Economics** Virgin PE, PP, and PET have been flooding the global market. New capacity in Asia and the US has driven prices down 30 to 40 percent. Meanwhile, recycled plastic costs more to produce in the UK than it can sell for. We are asking UK recyclers to compete with materials made in places with – ...
Read more

Today's KNOWLEDGE Share : A BUG IN INJECTION MOLDING

Image
Today's KNOWLEDGE Share A bug in injection molding – an injection-molded part in a bug? Neither! Nature and injection molding have reached similar results. Nature created the first micro-gear long before any human engineering existed. One such example is the Issus coleoptratus (shown in the picture). Furthermore, only now are we reaching the point where injection-molded polymer microgears can approach this level of performance. Looking at the images, which one do you think is the natural gear, and which one is the molded version? It is not that easy to tell, right? Their appearance and operating principles are surprisingly similar. Chitin, a natural linear polymer, forms what nature essentially "molds” into shape. In engineering, we rely on advanced technical polymers to produce similar geometry through actual injection molding. They are not the same material, yet they solve the same issue: Stiffness, dimensional stability, and reliable function at a scale where tolerances...
Read more